Expert Answers about Chevrolet ATV Hitch

• Recommended Hitch For A 2021 Honda Recon ES ATV
• We do sell some ATV hitch receivers that might fit your 2021 Honda Recon ES ATV trailer hitch. I cannot guarantee the fit, but the Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 2" Hitch Ball,part # C45038, is a 2" receiver with a 2" ball mount. The Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 1-7/8" Hitch Ball. part # C45029, is a 2" receiver with a 1-7/8" ball mount. I have included a product review link and a video review link below.
  view full answer...


• ATV Hitch, 4 inch Rise Ball Mount and Hitch Recommendation
• What you could do is install the Curt ATV hitch part # C45006 on your ATV and then use a ball mount with a 4 inch rise like the part # C45070 and then for a 2 inch ball part # 63845. Finally for a hitch pin part # C21500.
  view full answer...


• Dimensions and Weight Capacity of the Curt Ball Mount for 2" ATV Hitches # C45005
• The capacity of the Curt Ball Mount for 2" ATV Hitches # C45005 is the same as the capacity of any ATV hitch it would be used in. It does not have a stated capacity beyond that but basically your ATV hitch would fail before it would. It is a hollow shank too. The length is 6 inches from the pin hole to the center of the hitch ball and 7-1/2 inches from the center of the pin hole to the center of the clevis hole.
  view full answer...


• Recommended Ball Mount With Clevis For ATV Towing
• A hitch ball will give you better control for backing up your travel trailer with your ATV. I recommend the Curt Ball Mount for 2" ATV Hitches - 2" Ball and Clevis Bar - 1/4" Rise # C45009. This will give you the clevis as well as a 2 inch ball for your application. If you need the entire system, I recommend the Curt ATV Towing Starter Kit - 2" Receiver - 6" Long Ball Mount - 2" Hitch Ball # C45038.
  view full answer...


• How To Install a Pintle Hook On an ATV
• I do have an option for you but I am not aware of any pintle hooks available for a 1-1/4" trailer hitch receiver. Therefore, you u will need to replace the 1-1/4" trailer hitch receiver with a 2" trailer hitch receiver. In order to do this we have a few options, the Reese Towpower 3-Way ATV Hitch part # RP7065100 or the Curt ATV Ball Mount Adapter part # C45006 should work. These will then allow you to install a pintle hook like the Buyers Pintle Hook part # 337RM5P.
  view full answer...


• How to Determine if Reese Towpower 3-Way ATV Hitch # RP7065000 will Fit an ATV
• As long as your 2014 Honda Rancher 420 4WD has a hitch ball hole at the rear of it that measures 3/4 inch in diameter the Reese Towpower 3-Way ATV Hitch # RP7065000 that you referenced will fit and work well.
  view full answer...


• Recommended Winch Mount for 1989 Kawasaki Bayou 300 ATV
• If your 1989 Kawasaki KLF 300 Bayou ATV has a 2 inch trailer hitch receiver, you can use the Portable Receiver Mount, # BDW20011. This mount allows your Superwinch to be mounted to any 2" hitch receiver and has pre-drilled holes and hardware for attaching the winch to the shank. If you do not have a receiver on your Bayou ATV, then I recommend the Curt ATV Ball Mount Adapter with Welded D-Ring - Bolt On # C45006. There is not a custom mount available for your particular model ATV from...
  view full answer...


• What Prevents Reese Towpower 3-Way ATV Hitch # RP7065000 From Swiveling When Reversing
• What keeps the Reese Towpower 3-Way ATV Hitch # RP7065000 from turning is torquing down the install bolt which prevents it from being able to swivel. This will prevent it from swiveling when backing up as well. I attached a review video for this hitch for you to check with more info as well.
  view full answer...


• Trailer Hitch Recommendation for 2014 BMW X1
• The closest thing we have to a hitch solution for you would be the Draw Tite hitch part # 75761 but it only has a 400 lb tongue weight capacity and would not be strong enough for your 600 lb ATV plus the weight of the carrier. For that heavy of an ATV you'd have to look into a small trailer for transporting it. The Draw Tite # 75761 would be a great option for this though. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball...
  view full answer...


• 2-Inch Hitch Cargo Carrier Option for Transporting Dirt Bike and ATVs
• Cargo carriers intended for motorcycle transport are indeed available but these specialized carriers would not be suitable for use with ATVs. Likewise the platform cargo carriers that might be able to handle the weight of your two very small ATVs, such as # 63153, may not be ideal for use with the 2-wheeled dirt bike. Their requirements in terms of how they need to be secured will differ and no one single item will do an ideal job with both. The weight of even a smaller dirt bike plus...
  view full answer...


• Is There a Hitch Ball for 5/8" Hole On Back of Mower
• Yes, we do offer hitch balls with a 5/8" diameter shank, the Curt 2" ATV Hich Ball part # C40097 or Curt 1-7/8" ATV Hitch Ball part # C40095.
  view full answer...


• Solution to Add Coupler to Generator to be Towed Around by ATV
• The best solution for that would be to weld on a channel to the generator like the part # BDAC3000300 so that you can use a channel mounted coupler like the part # PSA200S0303.
  view full answer...


• Thoughts on Hauling 220 LB ATV in Hitch Carrier Using 18 Inch Hitch Extension on 2007 Chev Avalanche
• I recommend that you start off by checking your owner's manual to determine the tongue weight capacity of your 2007 Chevrolet Avalanche and the hitch receiver. Exceeding these capacities could damage the truck or cause the attachment points between the vehicle and the hitch to fail. The longest standard 2 inch hitch receiver extension is our Hidden Hitch 18 Inch Extender, # HE18. You will also need to keep in mind that using an extender will reduce the tongue weight capacity of the vehicle...
  view full answer...


• Extended Weight Distribution to Tow a Trailer with ATV In Bed and Tailgate Down on a 2013 Ford F-150
• Weight distribution shank # RP63971 measures 15 inches from the center of the hitch pin hole to the center of the ball hole when using a round bar weight distribution system. Measure from the center of the pin hole back to how far the ATV will stick out to determine if this is enough extension. When choosing a system you have to go by the tongue weight of the trailer when loaded and ready to tow and add to that the weight of anything loaded behind the rear axle of the truck bed. With the...
  view full answer...


• Winch Mount for ATV When Custom Mount Is Not Available
• We have custom fit winch mounts from Bulldog and Superwinch for ATVs but neither manufacturer has a confirmed fit for your 2004 Suzuki King Quad LTF300 FK4. I recommend the Reese Towpower 3-Way ATV Hitch w/ Ball Mount Adapter - 2,000 lbs # RP7065100 and then you can use the Curt Trailer Hitch Electric Winch Mount Plate # C31010 or something similar in that receiver. There won't be a line pull rating that is accurate for a configuration like this, so you will need to use your best judgment...
  view full answer...


• Trailer Hitch Recommendation for 2018 373FB Grand Design
• With a multi-hitch like the Curt part # 13703 installed on your 2018 373fb Grand Design you could tow a small trailer with an ATV like you mentioned. This hitch has a capacity of 3,500 lbs which would work well for you.
  view full answer...


• 8 inch Hitch Extender Recommendation for 2014 Toyota Tundra with 2-ATVs in Bed of Truck
• We have the part # C45791 which is an 8 inch hitch extender. It has the capacity for your trailer as it has a 3,500 lb capacity. You should note that the towing capacity of your hitch gets cut in half when using an extender like this. But since you have a towing capacity of 9,800 lbs that won't be a problem at all.
  view full answer...


• Travel Trailer Hitch Recommendation for Cargo Carrier for Small ATV
• For what you are looking to do I would recommend a multi-fit hitch like the part # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. This hitch can work great on frames that are up to 44 inches apart. If your frame is wider than that you would want the part # 13703 that is adjustable for frames that are from 22 to 72 inches in width.
  view full answer...


• How to Find a Ball Mount with the Right Rise or Drop to Tow a Trailer Level with an ATV
• I will be happy to help. To determine the right amount of drop you will need the first step is to take a couple of measurements. Park the ATV and the trailer on level ground. Measure from the ground to the top of the receiver opening on the ATV. Then, level the trailer (as if you were towing it level) and measure from the ground to the bottom of the coupler. The difference is the amount of drop you will need (unless the trailer is higher then the difference would be the amount of rise...
  view full answer...


• Weight Distribution System Recommendation for 1997 Dodge 3500 Towing an Arctic Fox 25R with ATVs
• Thank you for all of the information you provided. The best way to select a weight distribution system is to determine the tongue weight of your trailer when it is loaded and ready to tow and add the weight of any cargo loaded behind the rear axle in your truck bed. Once you determine the total tongue weight of your towing setup, you will want to choose a weight distribution system that can handle your total tongue weight. For example, if you plan on loading your trailer to the maximum...
  view full answer...